Hello Guys
In my environment run the Logical Switch Test:
The source is node1 and destination is node2
The size of test packet is VXLAN Standard
Now in the GUI show
Packets sent by node1
Not all packets received by node2
Now I run the esxcli network diag ping --netstack=vxlan --host 172.23.0.66 --size=1572
Received Bytes: 1580
Host: 172.23.0.66
ICMP Seq: 0
TTL: 64
Round-trip Time: 300 us
Dup: false
Detail:
Received Bytes: 1580
Host: 172.23.0.66
ICMP Seq: 1
TTL: 64
Round-trip Time: 281 us
Dup: false
Detail:
Received Bytes: 1580
Host: 172.23.0.66
ICMP Seq: 2
TTL: 64
Round-trip Time: 268 us
Dup: false
Detail:
Summary:
Host Addr: 172.23.0.66
Transmitted: 3
Recieved: 3
Duplicated: 0
Packet Lost: 0
Round-trip Min: 268 us
Round-trip Avg: 282 us
Round-trip Max: 299 us
Now my doubts is with the LS Switch is correct because by cli not show lost packets
Regards
Good.
It should be issue related to GUI which i have observed in NSX version 6.2.2
Since the CLI output is as expected, its fine. It will not be an issue.
Which version of NSX you are running.
I do had faced this problem earlier, when trying via GUI it shows that packets are not received.
But via CLI observed no packet loss. It was looking more like the GUI error
Can you try with the size of 1600 via cli & check the output ?
Hello
The versión is 6.3.5
I chech to 1600 and the result is OK by cli.
Good.
It should be issue related to GUI which i have observed in NSX version 6.2.2
Since the CLI output is as expected, its fine. It will not be an issue.