I have this problem from esxi version 6.0 to 6.5 on new esxi
vm's did run good on my old esxi with i5 processor. i make an ovf and imported on new machine
now upgraded the hardware to amd fx processor
sometimes 10 minutes and sometimes 6 hours before PSOD
i tried :
- change processor settings from 4 to 1
- change vmxnet3 to e1000 and e1000e
Hi
Help me with the exact Make and model of HW and Processor information.
Thanks & Regards
Arjun Dooti
i got as system board asrock 970 pro3 r2.0 with bios 2.80
amd fx 8320 not overclocked
16 gb non ecc ram 2400
1x samsung Evo 250gb ssd
1x crucial m500 480gb ssd
4x wd green 2tb hdd
intel pro ct gigabit adapter
the disks where also in the old esxi machine in the new esxi I reformatted al disks
esxi installed on Samsung ssd
i run 4x vm with all 2gb ram and 4x cpu
1x win 10
3x server 2012
I'm thinking about getting the ASRock 970 Pro3 R2.0. The board I currently have (Gigabyte GA-78LMT-USB3) doesn't support PCI passthrough, and I also can't see any hardware information from within VMware 6.5 on either the System sensors or Storage pages.
Can you confirm if you're able to see hardware info in VMware?
Also are you able to do PCI passthrough?
Also I have an amd fx 8350, but I see a warning on pcpartpicker that I might have to use a different cpu in order to flash a bios to a 970 board so that it will support my CPU, can you comment on whether your board supported your CPU out of the box or if you had to use another CPU to flash a different BIOS version?
Hi Joko,
Try running ESXi image again on new machine and use ugprade option rather than fresh installation. This will surely upgrade the CPU drivers according to hardware change.
Let us know the result once you done.
Thanks
If it resolves your issue, mark it resolved else helpful.