Bonjour à tous.
J'essaye d'installer Cisco Nexus 1000v sur un environnement de val et je reste bloqué sur le menu "Edit settings" qui reste grisé.
J'ai suivi un certain nombre de pistes, mais rien ne change.
Quelques infos:
Nexus1000v-1# sh svs connections
connection MYVCENTER:
ip address: 192.168.100.50
remote port: 80
protocol: vmware-vim https
certificate: default
datacenter name: TEST_DC
admin:
max-ports: 12000
DVS uuid: 9a 58 0e 50 f8 81 c6 34-cf 2d c6 c0 a1 0c a7 3b
config status: Enabled
operational status: Connected
sync status: Complete
version: VMware vCenter Server 5.5.0 build-2646482
vc-uuid: 719D831F-E414-4F31-90CE-7965734E87FA
ssl-cert: self-signed or not authenticated
Les plan déclares:
vlan 1,4-9,11,70,100,666,999
port-channel load-balance ethernet source-mac
port-profile default max-ports 32
port-profile type ethernet Unused_Or_Quarantine_Uplink
shutdown
description Port-group created for Nexus 1000V internal usage. Do not use.
vmware port-group
port-profile type vethernet Unused_Or_Quarantine_Veth
shutdown
description Port-group created for Nexus 1000V internal usage. Do not use.
state enabled
vmware port-group
port-profile type vethernet NX_vServers
switchport access vlan 100
switchport mode access
no shutdown
max-ports 40
state enabled
vmware port-group
port-profile type ethernet system-uplink
switchport mode trunk
switchport trunk allowed vlan 4-11,70,100
no shutdown
system vlan 4-11,70,100
state enabled
vmware port-group
svs-domain
domain id 6
control vlan 1
packet vlan 1
svs mode L3 interface mgmt0
switch-guid 39b04781-932e-4c16-9de9-9ce718b39062
enable l3sec
Il y a ce point point que je ne comprend pas:
Nexus1000v-1(config-port-prof)# system vlan 4-11,70,100
ERROR: Some of the input vlans are not active.
All system vlans should be in the active state
La version sur l'ESXi 5.1 semble être la bonne:
esxcli software vib list
Name Version Vendor Acceptance Level Install Date
----------------------------- ------------------------------------ ------ ---------------- ------------
cisco-vem-v198-esx 5.2.1.3.1.5a.0-3.1.1 Cisco PartnerSupported 2016-11-24
~ # vemcmd show port
LTL VSM Port Admin Link State Cause PC-LTL SGID ORG svcpath Type Vem Port
20 Eth1/3 UP UP F/B* - 0 0 0 vmnic2
* F/B: Port is BLOCKED on some of the vlans.
One or more vlans are either not created or
not in the list of allowed vlans for this port.
Please run "vemcmd show port vlans" to see the details.
Merci pour votre aide.