vCenter server time out of sync

[Kpoplobster]

Hello,

All my clocks are in sync, but I keep getting the error:

Process: vCServer: Checking 172.22.108.5 TIme Sync failed to start/complete.  Returned RC =1, STAFResult= { u'rc': u'0', 'staf-map-class-name': u'STAF/Service/Process/COmpletionInfo', u'key': None, u'fileList': [{u'data': u'1462200863', u'rc': 'staf-map-class-name': u'STAF/Service/Process?returnFIleInfo'}]}

I can't seem to resolve this issue any help would be appreciated.  I'm just trying to run a partial tile with the windows servers only.  Attached is my config file.

Thanks!

[RebeccaG]

Hi kpoplobster,

Could you please zip your results folder for the affected run and attach it to this thread? I will take a look and get back to you.

Thank you,

Rebecca

[Kpoplobster]

Hi Rebecca,

I tried a couple things, but now I'm getting a different error.  Can't seem to clear this, and have tried down grading to powercli version 5.8. Can you please assist me with this error?

VMmark2 PSfe 1.4

  Starting Up VMmark2PS Workers : Started 4

  Loadtime  = 00:00:00.86

  Polling Workers State ::

   2 : Error!

   4 : Error!

   6 : Error!

   8 : Error!

Error Initializing Workers

  Errors Found : 4

  Workers Ready : 0

Error Initializing Workers (4) : Halting Workers : Purging Qs : Done

I've attached my results in a compressed file.  Thanks!

[RebeccaG]

Hi, thank you for posting your results file.

That's good that you downgraded to PowerCLI 5.8. Did you also make sure you are running Powershell v2?

In VMmark2.config, try doubling your current values for RMQ_MinInitDelay, RMQ_WorkerDelay and RMQ_PowerCLI_Delay and rerunning.

Thank you,

Rebecca