Anyone knows if there is any news about this issues with QUADRO cards and AMD CPUs?
I've tried the new NVIDIA Driver 340.32, but with this new one doesn't even detect my QUADRO Card.
Hi Erwin, how is your experience with firepro s7000?
Nvidia Support Says Vmware support only the following cards as pass through.Can VMware Double confirm this?
GRID Series:
GRID K2, GRID K1
http://www.nvidia.com/download/driverResults.aspx/77809/en-us
http://www.nvidia.com/download/driverresults.aspx/69289/en-us
Not correct, maybe they where confused with vSGA, vDGA and vGPU.
Passthrough = vDGA, see the HCL here: VMware Compatibility Guide: vdga
// Linjo
Ok..We have the issue that Nvidia Control panel not opening on the VM (Windows 2008 R2) even we have installed the corrected driver and software for quadro k600.
Any suggestions?
we have Esxi 5.5 update 2 where nvidia card installed
First thing to check would be that in device manager the nVidia card is actually being recognized and enumerated (look in the "Display adapters" key). Second thing would be to know that depending on how you're accessing the VM that control panel sometimes doesn't open. I can tell you for sure that if you're coming in over RDP you can't open that control panel.
Dear All
I know this thread is dead but maybe someone can direct me or had similar issues
I am trying to figure out if there is any compatibility issue or whatsoever in my configuration
Hardware:
Core i7 4930k Proc
Asus P9X79-WS Motherboard
64 Gig Ram
2 SSDs
2 Nvidia Quadro K6000 GPUs with Quadro SyncBoard
Esxi 6.0 update 2
Installed ESXI with 2 VMs. Passthrough K6000 and both the VMs are running perfectly 4 output each (Windows 7 x64)
Following are the issues:
Using Nvidia driver ver 362.56
Nvidia Control Panel missing mosaic feature - Got it sorted by mosaic utility
Nvidia Control Panel no option to configure Syncboard. If i check the system information, i can see the sync board but i cannot configure the sync
Do i need any VIB files for the host?
Regards
Kazim