Hello. I installed Windows 8 Release Preview build 8400 on VMware® Workstation 8.0.3 build-703057. While installing virtual machine i choosed NAT as internet connection option. But virtual machine doesn't see it (internet). What can i do, to connect vm to the internet?
Host machine Windows 7 with NAT internet connection
You need to change the Guest OS from "Other" to "Windows 7" and then add the following to the .vmx configuration file to have a working Network Adapter.
ethernet0.virtualDev = "e1000"
Then if you want, you'll be able to install VMware Tools however do a custom install and do not install the SVGA Driver.
Change the adapter to Bridged. This is the only way I have been to network Windows 8.
mfelker ---> What you suggest does not work.
My problem (I assume the original poster has the same problem):
My Host OS is Windows 7 64-bit, Utlimate, Service Pack 1.
16 GB of RAM. Intel Core i3 CPU (dual core/quad thread). I have a WiFi router and usually use Bridged networking for all of my Guest OSes.
VMware Workstation is 8.0.3 version.
Windows 8 Guest runs fine, but VMware Workstation says there is no VMware Tools for it.
And, without VMware Tools, the networking does not work - it does not work when set to NAT or set to Bridged.
So, there is no Internet access on the Guest OS, and no network folder sharing/etc.
In Device Manager, the Ethernet controller shows as one without a driver - yellow exclamatiom mark (and is not in the Network adapters section, but in Other devices instead).
In Control Panel ---> Networking, the list of network adapters shows as empty.
In Command Prompt, ipconfig shows an empty list.
Please suggest a possible way to get networking to work.
Maybe these?? --->
1) Use VMware tools from some other guest OS in some way.
2) Change the VMX to use a generic/real network card instead of VMware card, then install that card driver (AMD/Intel/etc).
3) Some other way?
Archive (compress) and attach to a reply post a copy of the .vmx configuration file and the vmware.log file.
Here is the same problem.
abirhasan wrote: Here is the same problem.
If what you're actually trying to say is you're having the same problem too, then archive (compress) and attach to a reply post a copy of the .vmx configuration file and the vmware.log file.
To me this is teh centdral problem.
----------------------------------------------------------------------------------
Windows 8 Guest runs fine, but VMware Workstation says there is no VMware Tools for it.
And, without VMware Tools, the networking does not work - it does not work when set to NAT or set to Bridged.
--------------------------------------------------------------------------------------------------------------------------------------------
Sometimes (but not always) Networkinig won't work even with VMware Tools is installed. But I don't see that you have tried to install the Tools program anyway. When you install them on Windows 8 guese use custom insatll and don't enable the SVGA this is a known problem and will lead to the failure of the entire guest.
Look at the network settings there may be a setting is a setting in the network adapter (if you use Bridged) that allows you to replcate the host network networking configuration. You mght try that . But since I'm not using 8.0.3 at the moment this could be a feature of WS beta - which is more compatibly with Window 8 anyway. This program can detect a Windows 8 CDROM.
BTW I often learn things I didn't think of from posts. For example I lost connectivity on a guest recently and didn't think to look at the control panel for network devices!
You need to change the Guest OS from "Other" to "Windows 7" and then add the following to the .vmx configuration file to have a working Network Adapter.
ethernet0.virtualDev = "e1000"
Then if you want, you'll be able to install VMware Tools however do a custom install and do not install the SVGA Driver.
done. Guest system asking for driver for ethernet controller now.
UPD: got standart drivers installed. Internet works great. Thanks
Thanks for posting. It worked for me this morning while creating an eval setup!
Guest: Windows 8 Pro, x32, Technet.
VMware: Workstation 9
Host: Windows 7 Pro, x64
--Jeff
aurelius7 wrote:
Thanks for posting. It worked for me this morning while creating an eval setup!
Guest: Windows 8 Pro, x32, Technet.
VMware: Workstation 9
Host: Windows 7 Pro, x64
Just an FYI... If using VMware Workstation 9 or VMware Player 5 you should be able to select Windows 8 when creating a VM and it will set the Ethernet Adapter as follows.
ethernet0.virtualDev = "e1000e"
If upgrading an existing Windows 7 VM even changing it to Windows 8 will not change it to "e1000e" and that needs to be done by manually editing the .vmx configuration file or by deleting/adding back the Network Adapter from the Virtual Machines Settings after changing its OS to Windows 8.
I would agree what you outlined should happen, but my experience this morning wasn't so.
I did choose the Windows 8 option for a clean install of Windows 8 Pro x32. After install, the OS stated it saw the network card, but the driver wasn't accepted. My options indicated by Windows 8 was to reinstall the driver. So I looked on the VMware tools disk and didn't see a driver.
Next, I searched through the forums and tried the idea of switching the VM's network setting from NAT to Bridged. After OS reboot, negative on the network connectivity.
Then, I found your option on my next forum search and that worked instantly after reboot. In fact, the first question Windows 8 was asking me after logging in was if I wanted to share files with the network.
In addition, I did search for your line below in respective VMX prior to making changes
ethernet0.virtualDev = "e1000e"
However, I can bear witness to you that the line specified above wasn't in there.
If you want, I can do a Windows 8 reinstall to see if this issue replicates. Otherwise, I'll move on.
The steps I followed were during my install this morning:
-> Chose New VM, Chose Windows 8, Chose to Install OS later
-> Chose 1GB Mem, Chose 60GB HDD, Removed FDD&Printer,
-> Set NAT.
I'm on a Intel Q6600@2.4GHZ, 8GB, Win 7 x64.
I did have VM's running at the same time as the install was going: 2 XP VM's and a Linux VM....which were not running any user apps.
Thanks again.
you should change you vm network setting in bridge network.
Bridged networking should only be used if you have a router. If you don't have one, you should not use it.
Also, if the network card does not work due to a driver issue, I don't see how changing the VMware Guest OS Networking mode can help.
Editing the VMX file as outlined above does help in such cases.