Just wondering if anyone has seen this on the Equallogic SAN. Using firmware 5.0.2.
I was getting log entries like this for about 2 hours then they stopped. Everything is fine now. I didn't actually lose any connections. And it was occurring for 2 of my SANs at the same time. No problem with power or network connections/switches to the controllers. I have Dell working on it now, but no info yet.
-----------------------------------------
WARNING event from storage array SAN1 repeated 2 times
subsystem: SP
event: 33.3.0
time: Sat Feb 19 23:12:29 2011
Communication link between control modules has shut down.
-----------------------------------------
WARNING event from storage array SAN1
subsystem: SP
event: 28.3.51
time: Sat Feb 19 23:12:29 2011
Warning health conditions currently exist.
Correct these conditions before they affect array operation.
Active control module cannot communicate with secondary control module. Failover cannot occur.
There are 1 outstanding health conditions. Correct these conditions before they affect array operation.
-----------------------------------------
WARNING event from storage array SAN1
subsystem: SP
event: 28.3.51
time: Sat Feb 19 23:12:29 2011
Warning health conditions currently exist.
Correct these conditions before they affect array operation.
Control module was removed from array.
Active control module cannot communicate with secondary control module. Failover cannot occur.
There are 2 outstanding health conditions. Correct these conditions before they affect array operation.
-----------------------------------------
ERROR event from storage array SAN1 repeated 2 times
subsystem: SP
event: 28.4.50
time: Sat Feb 19 23:12:32 2011
Control module in slot 0 is not functioning or not installed.
-----------------------------------------
WARNING event from storage array SAN1
subsystem: SP
event: 28.3.51
time: Sat Feb 19 23:13:26 2011
Warning health conditions currently exist.
Correct these conditions before they affect array operation.
Active control module cannot communicate with secondary control module. Failover cannot occur.
There are 1 outstanding health conditions. Correct these conditions before they affect array operation.
I suggest to open a call Dell support. Seems an issue in controllers communication.
Andre