Hola,
Alguno de ustedes a pasado por el caso de que desean agregar un disco RDM a una VM y esta opcion aparece deshabilitada. Ya esta presentada la LUN con el ESX incluso esto me pasa en VM que cuentan con 1 disco RDM al querer agregar otro no me aparece habilitada la opcion.
Alguna idea de como resolver el problema???
Cuento con vSphere 4
Saludos y gracias
que tal kro09, echale un vistazo a este kb:
intenta cerrando el vsphere client y reinciando los servicios del vcenter, recuerda que la lun debe de ser RAW o sin ningun tipo de formato para poderla presentar como rdm a una vm.
saludos.
If you find this information useful, please award points for "correct" / "helpful".
My blog virtualización en tu idioma
Sorry for answering in English, my Spanish isn't good enough.
If I understood correctly, you presented a new LUN to the host and added it to one VM as an RDM and now you want to add this LUN to another VM?
When adding a LUN to a VM as an RDM, an RDM mapping file (vmdk) is created. As long as this mapping file exists, the LUN will not be available to select it as an RDM for another VM. If you want to add the same RDM to additional VM (e.g. for a MSCS setup), you have to select "use an existing virtual disk" and select this mapping file. If you want to add it to another VM and don't need the RDM on the original VM anymore, you have to detach the RDM from the first VM by selecting "Delete from disk", which will only delete the mapping file (except the RDM is virtual and you have snapshots for it!)
André
Hi André,
His problem is that he want to add a second RDM to VM, but it show greyed out and can't add it.
Regards,
-
José Luis Gómez Ferrer de Couto
Founder of PiPo e2H
Blog: http://blog.e2h.net
Si encuentras que esta o cualquier otra respuesta fue de utilidad, por favor da el voto. Gracias.
If you find this or any other answer useful, please consider awarding points. Thank you.
-
[http://blog.e2h.net|http://feeds.feedburner.com/PipoE2h-SolucionesTicAvanzadas]
Hola,
Si eliges la opción de añadir un nuevo storage al host ESX, ¿aparece la LUN que has publicado?. De ser así, ¿has probado con la VM apagada?.
Saludos.
-
José Luis Gómez Ferrer de Couto
Founder of PiPo e2H
Blog: http://blog.e2h.net
Si encuentras que esta o cualquier otra respuesta fue de utilidad, por favor da el voto. Gracias.
If you find this or any other answer useful, please consider awarding points. Thank you.
-
[http://blog.e2h.net|http://feeds.feedburner.com/PipoE2h-SolucionesTicAvanzadas]
Looks like it's about time to refresh my Spanish The last classroom training I took was back in 1985...
André
Hi,
don't worry, you're always welcome here
Regards/Saludos,
Pablo
Please consider awarding
any helpful or corrrect answer. Thanks!! -Por favor considera premiar
cualquier respuesta útil o correcta. ¡¡Muchas gracias!!No worries André.
I wish my Spanish was like your English
Saludos,
Jose Maria Gonzalez,
Founder and President of JmG Virtual Consulting, S.L
-
Mi empresa: JmG Virtual Consulting, S.L - Lideres y Expertos en Virtualizacion
Mi blog: El blog de Virtualizacion en Español - con Jose Maria Gonzalez.
Mi twitter: El blog de Virtualizacion en Español - con Jose Maria Gonzalez
VMware vExpert 2009, vExpert 2010, VCI, VCP4, VCP3, VCP2, RHCE, MCSE
Autor del libro <a href="http://www.lulu.com/product/tapa-blanda/101-secretos-de-vmware-vsphere/6345031" target="_blank">101 Secretos de VMware vSphere</a>
Autor del libro VMware ESX y VMware VCP Hecho Fácil
-
If you find this or any other answer useful please consider awarding points by marking the answer helpful or correct.
<a href="http://feedproxy.google.com/ElBlogDeVirtualizacionEnEspanol">!http://feedproxy.google.com/ElBlogDeVirtualizacionEnEspanol.2.gif!</a>
Si aparece la LUN publicada y ya intente con la VM apagada. Habra algun servicio en especifico que tenga que revizar???
Lo extraño esque antes no tenia problema al crear un disco RDM en una VM.
Saludos y gracias,
Hola Kro09
Has visto este thread?. Te puede resultar interesante.
http://communities.vmware.com/thread/143248
Saludos,
Jose Maria Gonzalez,
Founder and President of JmG Virtual Consulting, S.L
-
Mi empresa: JmG Virtual Consulting, S.L - Lideres y Expertos en Virtualizacion
Mi blog: El blog de Virtualizacion en Español - con Jose Maria Gonzalez.
Mi twitter: El blog de Virtualizacion en Español - con Jose Maria Gonzalez
VMware vExpert 2009, vExpert 2010, VCI, VCP4, VCP3, VCP2, RHCE, MCSE
Autor del libro <a href="http://www.lulu.com/product/tapa-blanda/101-secretos-de-vmware-vsphere/6345031" target="_blank">101 Secretos de VMware vSphere</a>
Autor del libro VMware ESX y VMware VCP Hecho Fácil
-
If you find this or any other answer useful please consider awarding points by marking the answer helpful or correct.
<a href="http://feedproxy.google.com/ElBlogDeVirtualizacionEnEspanol">!http://feedproxy.google.com/ElBlogDeVirtualizacionEnEspanol.2.gif!</a>
Hola
Cuando esa opcion aparece desabilitada , es que, "ya has formateado la lun en vmfs".
La lun la tienes que preparar en la cabina y que la vea el esx en "storage adapters".
Cuando el esx la ve, ya puedes crear el disco en la mv haciendo referencia a esa lun por rdm.
saludos
Hola
Como dice akumal, no habras creado ya la particion vmfs en ese otro servidor???, mira si la tienes y borrala. Despues te deberia dejar.
Saludos.
VCP 410
Hi,
La creacion del disco virtual RDM lo estaba intentando desde el vCenter. lo que hice fue intentar conectandome directo al ESX y asi si funciono.
Gracias,