Installation from RPM went OK.
vmware-config.pl has vanished. Is this not part of the set-up any longer? Nothing in the User's manual about it.
So not surprisingly, when I try to start vmware, I get a stream of missing modules:
modinfo: could not find module vmmon
modinfo: could not find module vmnet
modinfo: could not find module vmblock
modinfo: could not find module vmci
modinfo: could not find module vsock
modinfo: could not find module vmmon
modinfo: could not find module vmnet
modinfo: could not find module vmblock
modinfo: could not find module vmci
modinfo: could not find module vsock
/usr/bin/vmware: line 31: 8602 Segmentation fault "$BINDIR"/vmware-modconfig --appname="VMware Workstation" --icon="vmware-workstation"
I've been using VMware Workstation since the very early days and a new install is generally an adventure. It seems you're just expected to know what's going on.
What's the configuration procedure now?
Cheers.
Same Problem, no help found up to now.
Same problem here.
No trouble with VMware-Workstation 6.0 - 6.5.1 on opensuse 10.3 - 11.0 x86_64.
Current VMware-Workstation 6.5.1-126130 x86_64 on opensuse 11.1 x86_64 has this problem.
Please help!
Hi, guy
Try this.
Login as root
mv /usr/lib/vmware/modules/binary /usr/lib/vmware/modules/binary_old
run as root vmware and vmware will automatic recompile everything.
hope help
Hey, great fix raid3868, I have just installed OPenSuse 11.1 64 bit and I was having this problem. Running that command did the trick.
Thanks!
Regards Peter.
Fix works for me too.
Nice and easy too.
Thanks!
Yes indeed it works! And Thanks & have a great X'mas & New Year!
initially:
I followed your rename step give here, and it compiled.
But it still can not find modules when running a VM after compiling. I had reboot still same.
I found out that it was vmmon & vmnet services not running:
# service -status-all
Module vmmon not loaded
Module vmnet not loaded
Then I restarted vmware service then it became OK:
# /etc/init.d/vmware restart
Note have to be root to do all the above stuff
Latest:
After reboot, it is the same still, vmware serivce have to be restarted manually once before any VM will run, otherwise it will still be unable to connect to vmmon & vmnet. Some how the init scripts is wrong or this AMD quad core 9950 with 4GB RAM is not doing things right when it entered run level 5.
vmmon & vmnet were not loaded automatically. Restarting vmware service will fix it. But it will e annoying to have to do this every time it boots up.
u.y.
Guys I have the same problem. I was happy when it compiled and started XP then the next time back to zero.
Now is the only problem I have to solve before I can upgrade to opensuse 11.1.
If I figure out a way I'll post it here.
-=terry=-
I revised the previous message
1. The fix works very well and the change is permanent, so it works after reboot etc. Thanks a lot for the tip.
2. Unity mode works very well
3. Palm sync (usb) works very well.
4. Loading of XP seems to take a long time. Other factors may be involved and if not I will open a thread about performance. Under opensuse 11 it was loading very fast. I will look into it.
Again thanks a lot for this tip!!
Wish for 2009 : VM ware team will update the VMware Workstation to work the new kernels.
Have all a happy new year.
-=terry=-
This fix worked great!!! Thanks for posting the information
Hi guys,
Ok, here are the steps to getting VMWare 6.5.1 running on OpenSuse 11.1 even after a reboot
zypper install gcc
you may also need: zypper install kernel-source
rpm -i VMware-Workstation-6.5.1-126130.x86_64.rpm
as raid3868 pointed out:
mv /usr/lib/vmware/modules/binary /usr/lib/vmware/modules/binary_old
run as root vmware and vmware will automatic recompile everything.
Next disable IPv6 in yast
Yast->Network Settings->Global Options-> Uncheck Enable IPv6->Ok
Also! (Very important)
Yast->Network Settings->Overview->"edit" your active
NIC(s)->Change DHCP version 4 and 6 to *DHCP version 4
only*->Next->Ok
Reboot
VMware should be right as rain now.
Someone else somewhere suggested turning off the RUN_PARALLEL option in
sysconfig. I don't recommend this unless you like your system to take
forever to restart. The IPv6 is really what's killing everything as the
system takes too long trying to bring it up and VMMON, which is
dependent on the network services, gives up and fails.
Have fun!
Thanks,
Excellent that you found out what caused it.
My problem vanished in SuSE 11.1 although IPv6 was not disabled in Yast. I am using Knetworkmanager that may be the reason.
u.y.
thanks it worked for me
opensuse 11.1 x86_64