OK Blonde moment :S
I have been attempting to configure a 2k3 MSCS Clusteron ESX 3.5 with EVA back end storage - I have done this loads of time but this is my first one on EVA Storage. things have got so bad I even resorted to reading the Documenation
Issue
two Windows 2K3 R2 VMs created on local storage on two seperate machines, two Raw LUNs have been provisioned and presented to both ESX hosts. the LUNS can be seen by the two desired hosts.
now when I add the LUN to the guest I add the disk as a Physical RDM on a seperate channel (1.0) RDM appears in the Guest on a seperate controller as expected. the trouble starts when I try to add the disk to the second Win2k3 server. the LUN is not available, the same issue is the procedure is reversed and the second VM is selected first.
Host - ESX 3.5 U4
Hardware - BL685 G4
Storage EVA 4400
If you found this or any other answer useful please consider the use of the Helpful or correct buttons to award points
Tom Howarth VCP / vExpert
VMware Communities User Moderator
Blog: www.planetvm.net
Contributing author for the upcoming book "[VMware vSphere and Virtual Infrastructure Security: Securing ESX and the Virtual Environment|http://my.safaribooksonline.com/9780136083214]”. Currently available on roughcuts
Yep I did
If you found this or any other answer useful please consider the use of the Helpful or correct buttons to award points
Tom Howarth VCP / vExpert
VMware Communities User Moderator
Blog: www.planetvm.net
Contributing author for the upcoming book "[VMware vSphere and Virtual Infrastructure Security: Securing ESX and the Virtual Environment|http://my.safaribooksonline.com/9780136083214]”. Currently available on roughcuts
But on the second node you have to add the existing RDM file proxy (from the first node).
Not the LUN again.
Andre