Does HP BL460C G1 Support VPhere 4
Yes. I have 6 460c G1 hosts running vSphere 4.
But pay attention, not the all configurations supports all vSphere functions. For. ex. if you have Xeon 53xx CPUs, you won't be able to use Fault Tolerance.
---
VMware vExpert '2009
My hardware is BL460C G1 Processor is E5420.
It is strange that I install ESX 4 and 4I, I could not access the VI WebPage. Via VI, I still could not reach the host.
Therefore, I roll back to the ESX 3I. it works.
Works fine in my case, so I suppose that's not a problem with hardware.
---
VMware vExpert '2009
Could you kindly tell me the Build No. you use?
BTW, what about the configutation on the Switch you made? Only the Trunk Port? Anything else you made?
I upgraded my hosts from 3.5u4 to official ESX4.0 164009, and a couple of days ago I installed latest patches. So now I have build 175625.
There are "full" ESX servers, ESXi Embedded on flash disks, and ESXi Installable on local disks. No issues.
---
VMware vExpert '2009
Anton,
It is strange for me at this moment. Pls kindly refer to the steps what I have done before,
1. Config Trunk Port
2. Install ESX3I, working well.
3. Install ESX4I, Web Access Deny; VI Access Deny, Telnet Deny, Ping OK
4. Install ESX4, Web Access Deny; VI Access Deny, Telnet Deny, Ping OK
5. During installing ESX 4, I found that there is one error about "weasel", what is that?
6. My hardware is HP BL460C G1; Processor: E5420
Could you tell me your hardware specification? I want to know whether your product is the same with me or not.
BL460c G1 Xeon x5365 10-32GB RAM with various disk configurations, dual SAS, dual SATA, diskless (boot from USB). ESX and ESXi - all works fine.
---
VMware vExpert '2009
Friends...I have the same model hardware but my problem is another very strange indeed.
I have 3 hosts with VMWare ESX Server 3.5 update 4 installed in a HP
Blade solution (BL460c G1). VMWare ESX servers are communicating as
usual with the network and they were added to Virtual Center inventory.
After restarting any of those VMWare ESX Servers it loses the
communication with the rest of the network even with the others ESX
hosts.
Does anybody knows what would be the cause of this problem?
give up
Hi,
Have you news about this subjet ? I have the same problem.
Thanks.
Damien