• Any issues renaming an NSX prepared Cluster?in VMware NSX

    We are in an multi-site cross-vCenter configuration, and we want to rename the Cluster at 1 site. We run ELM so we get all our other non-nsx datacenters and clusters, and most are named the default "Cluster" at one si...
    Jeffery Hawks
    created by Jeffery Hawks
    Enthusiast
  • VMware VVD and External PSC deprecationin VMware NSX

    I am confused somewhat. We are running NSX-V in an multi-site active/active design with vSphere v6.5. We want to move to v6.7 but as you know the external PSC is becoming deprecated, yet the VVD still has the External...
    Jeffery Hawks
    last modified by Jeffery Hawks
    Enthusiast
  • Spoofguard blocking issuein VMware NSX

    Experiencing issues when spoofguard is enabled within NSX as it is retaining registrations which are old/retired. We often have multiple instances of VMs which are cycled on and off in order to do testing. If we disab...
    Dr.Virt
    created by Dr.Virt
    Enthusiast
  • L2 VPN and Egress Optimizationin VMware NSX

    I have a question regarding egress optimization. When using the NSX ESG to establish a L2 VPN (in order to stretch L2 subnets between sites), if egress optimization is used, the NSX ESG will act as a gateway for the V...
    georgiosservetas
    last modified by georgiosservetas
    Lurker
  • nsx_lab 0n fusion with 16 GB ramin VMware NSX

    Hi Nsx team,   Just thought of asking if anyone is able to deploy nsx lab environment using 16 GB ram on vmwarefusion on mac.
    jvm2016
    last modified by jvm2016
    Expert
  • getting vtep table from nsxmanager_NSXin VMware NSX

    Hi NSX team,   can someone suggest on the following . i have 3 clusters (in total 5 hosts) covered under single transport zone.   if i run folowing why only two hosts vtep information is displayed.
    jvm2016
    last modified by jvm2016
    Expert
  • Is Remote Desktop connection (RDP) with NLA supportedin VMware NSX

    Hi, Is Remote Desktop connection (RDP) with NLA supported in DFW ?   Thank you
    vSohill
    last modified by vSohill
    Hot Shot
  • NSX-T identity based data from other sources?in VMware NSX

    We currently use identity based rules with the FortiNet product (physical firewall) and want to feed username/IP info from their collector (which works very well) into NSX-Ts identity based fw to be able to use id bas...
    UofS
    last modified by UofS
    Enthusiast
    vExpert
  • NSX Manager 6.3.2 API calls slow responsein VMware NSX

    Hi Team,     We have a heavy loaded  NSX environment with more than 70 NSX Edges  ( NSX LB and NSX ESG) , 35 DLR's ..  3000 DFW rules..  Current configuration of NSX Manger is 16vCP...
    TarunGuptaAccenture
    last modified by TarunGuptaAccenture
    Novice
  • NSX-T : NSgroup grouping recommandationin VMware NSX

    Hello,   we are using NSX-T 2.4.1   Our take on micro-segmentation consists of grouping VM’s not by functionality (web server, DB, etc.) or division (HR, Finance, etc.), but by business unit or IT se...
    eric.krejci
    created by eric.krejci
    Enthusiast
    vExpert
  • Hostname URL resolution in NSX DFWin VMware NSX

    Hostname resolution doesn't work in NSX-V DFW...  does it work in NSX-T?   We have been integrating with cloud services and connecting from on premise to hostname URLs (example would www.s3.amazon.com)&...
    kwg66
    created by kwg66
    Enthusiast
  • NSX Data Securityin VMware NSX

    Looking at VMware Knowledge Base KB it shows the following:     What you see circled in RED pertains to NSX 6.4.1 and forward..   We have this functionality now in our older version of NSX we ar...
    kwg66
    last modified by kwg66
    Enthusiast
  • In which cluster would the DLR control VM sit?in VMware NSX

    Hello, I am currently studying for VCP-NV. I have question regarding the cluster deployment options. If we wish to deploy 3 clusters, i.e. Management, Edge and Compute, where would the DLR Control VM sit? since, this ...
    georgiosservetas
    last modified by georgiosservetas
    Lurker
  • Add Standalone NSX-v as Secondaryin VMware NSX

    Hi to all. I've this infrastructure:   1 VCSA 6.5 U3 with NSX 6.4.4 in standalone mode in SiteA 1 VCSA 6.5 U3 with NSX 6.4.4 in standalone mode in SiteB   Each NSX has its own configuration (Edge-DLR-LB-...
    MinoDC
    last modified by MinoDC
    Enthusiast
  • NSX-T 2.4.0 - System -> Overview tab hangsin VMware NSX

    As the title says i am having an issue in NSX-T 2.4 when i click in System-> Overview   For some reason it hangs indefinitely   Any thoughts?
    Lalegre
    last modified by Lalegre
    Enthusiast
  • port forwardingin VMware NSX

    Hello,   I have an issue on my external router with forwarding the same port for different web servers and wonder if this can be done via Load Balancing on NSX-T and then point all ports to LB VIP on external ro...
    Rob80
    last modified by Rob80
    Novice
  • Routing for VMs connecting to a L2 bridgein VMware NSX

    I am studying for VCP-NV and have a question regarding L2 bridging. Reading through the following vmware document "L2 Bridges", it states that "The logical router cannot be used as a gateway for devices connected to a...
    georgiosservetas
    last modified by georgiosservetas
    Lurker
  • Failed to get data for 'Host Preparation Status, Host Communication Channel Status'in VMware NSX

    Hi     We have vcenter 6.7 u1 and nsx 6.4 this message shows in the overview in 'Networking and security'  plz help me to solve this error   Failed to get data for 'Host Preparation Status, H...
    hamed88phl
    last modified by hamed88phl
    Lurker
  • NSX-T manager error_code 101?in VMware NSX

    i deployed a nsx-t 2.4 manager on KVM with "medium" type, it worked just fine until i installed second manager(on another KVM host) and join it to the first one. they all display the following messages on the web bro...
    niceguy001
    last modified by niceguy001
    Novice
  • firewall/sections/<section_id>/rules shows some object with the prefix of "default."in VMware NSX

    Hi, when running the Get firewall/sections/<section_id>/rules API, some of source/destination/appliedTo objects are prefixed with "default." : the name of the security group is Nsx_AAA but i see it as "default...
    Cloudistan
    last modified by Cloudistan
    Lurker
  • error thrown when trying to CREATE an nsx-t redirection rule using REST API.in VMware NSX

    PUT https://10.5.145.79/policy/api/v1/infra/domains/default/redirection-policies/adc3aec0-c640-11e9-a529-3be73129f6e9/rules/redirect-rule-1   request payload :   {       ...
    harish422
    last modified by harish422
    Lurker
  • NSX-T Ip exclusion from groupin VMware NSX

    Hi,   Is there anyway to exclude IP from security group in NSX-T? I know that there was an option to do it on V, when creating a security group ("select objects to exclude), but I don't see it on NSX-T. Thanks
    Cloudistan
    last modified by Cloudistan
    Lurker
  • NSX Controller deployment failures.in VMware NSX

    Hi,   I am trying to deploy the NSX controller but it stucks on deploying state and after waiting for 20-30 mins it gets fails. I am getting below error. I have made host as an NTP server but it is not working....
    Abhinav5656
    last modified by Abhinav5656
    Lurker
  • Secondary NSX shows alert status for logical switchesin VMware NSX

    Hi all,   NSX for vSphere 6.4.5.13282012 in cross-vCenter configuration. All that's configured is 4 logical switches. On the primary NSX they look green, on the secondary, they show "Alert" in the Status column....
    vmsysadmin201110141
    last modified by vmsysadmin201110141
    Novice
  • NSX-T - Cross-site requirementsin VMware NSX

    Hello.   I\m trying to simulate NSX-T multi-site in my home lab, the remote host was configured for NSX successfully, but, traffic is not passing over GENEVE tunnel.   SO, I\m simulating SITE01, and SITE02...
    MRoushdy
    last modified by MRoushdy
    Enthusiast
    vExpert
  • NSX-T - configuring MTU for cross-site connectivityin VMware NSX

    Hello, I'm trying to use Cisco router model 1841 to connect to sites to have NSX-T streaked segments, but the maximum MTU supported by that router is only 1500, which is lower than what's required for NSX-T frames to ...
    MRoushdy
    last modified by MRoushdy
    Enthusiast
    vExpert
  • Quantifying the Impact of NSX DFW IPFix Enablingin VMware NSX

    The system managers for the vSphere environment at this gig are concerned that if we enable IPFix (vCenter/Networking and Security/Flow Monitoring/Config) - that it could cause a problem. Is there anything I could p...
    gilgamed
    last modified by gilgamed
    Lurker
  • NSX-T 2.4.2 - no Tunnel TEP was createdin VMware NSX

    Hello,     I use NSX-T in my home lab, and it works fine, and now we are trying it at work, but the problem is that none of the ESXi hosts, and the edge node has a configured TEP. I can see that the hosts p...
    MRoushdy
    last modified by MRoushdy
    Enthusiast
    vExpert
  • Accessing NSX Logical Switch through a VLAN on the physical networkin VMware NSX

    Hello,   I have a Logical Switch called testnet_SW set up in NSX, it currently has one VM attached to it, along with one NSX Edge that provides NAT and DHCP. Is there a way that I can make it so that I can acces...
    MasterWayZ
    last modified by MasterWayZ
    Novice
  • Geneve tunnel down between Edge and Compute N-VDSin VMware NSX

    Hi,   My setup is a shared cluster between Edge and Compute hosts, running NSX-T 2.4.  The Geneve tunnel between the Edge and Compute nodes is reporting down. I can ping the T0"s uplink but cannot ping the ...
    encorele
    last modified by encorele
    Novice