Please note that this is a bit messy and I will write up a nicer set of instructions once I have more time.
A little background: I have a server that was a test/demo machine running ESX 2.5 that only had IDE drives. Because of this, when I did a clean install of ESX 3, I learned that I would not be able to access the remaining 50GB of disk on my test machine. Obviously, this frustrated me. After a little digging, I found that the ESX 3 COS supports NFSD but only the for UDP connections. No good when connecting from the VMK which only uses TCP for NFS mounts. Knowing just a little about linux as a whole, I knew that I really just needed a TCP enabled build of the nsfd.o module. The problem was getting one. Below are the steps I used to build the module as well as config changes needed in order to allow inbound NFS connections through the ESX firewall.
Once you have a good nsfd.o file, it can be copied to other machines to bypass the build process. I will post my nfsd.tgz on my company website along with this document when I have time.
- NOTE: DO NOT RUN THE COMPILE ON A PRODUCTION MACHINE! -------
1) As with any modification to an OS, make a backup of the things you're going to possible change. In this case, the modules folder in /lib/modules.
cp 2.4.21-37.0.2.ELvmnix 2.4.21-37.0.2.ELvmnix.old
Kernel module changes ** Skip to #11 if you have a valid nsfd.o **
2)
cd /usr/src/linux-2.4/configs
3) nano vmnix.config, search for CONFIG_NFSD_TCP and change the commented line to:
CONFIG_NFSD_TCP=y
4) cp vmnix.config kernel-2.4.21-i686-vmnix.config
5) cd ..
6) nano Makefile, change the end of the EXTRAVERSION line from ELcustom to ELvmnix
7) make oldconfig && make dep
When make config runs, you can skip the questions by hitting enter. To be sure that TCP is enabled, you can look for the NFS daemon section and answer Y there. (If you performed steps 2 & 3 correctly, it will be)
8) nano includes/linux/version.h and edit the following line (or add it if it doesn't exist):
#define VMNIX_BUILD "27701"
9) make modules
(It may not be required to make the kernel itself but I did to make sure it all links)
10) If the build completed properly, you can copy the newly created nfsd.o module.
cp ./fs/nfsd/nfsd.o into /lib/modules/2.4.21-37.0.2.ELvmnix/kernel/fs/nfsd/
Service and Firewall Configuration
11) nano /etc/init.d/nfs
12) change line 6 to be:
# chkconfig: - 50 20
This causes the nfs daemons to start BEFORE the vmware-late process (which mounts NFS stores) when you run step 13
13) chkconfig --level 345 nfs on
14) chkconfig --level 345 portmap on
15) esxcfg-firewall -o 111,tcp,in,sunrpc
16) esxcfg-firewall -o 111,udp,in,sunrpc
17) esxcfg-firewall -o 369,tcp,in,rpc2portmap
18) esxcfg-firewall -o 369,udp,in,rpc2portmap
19) esxcfg-firewall -o 808,tcp,in,mountd
20) esxcfg-firewall -o 2049,tcp,in,nfs
21) esxcfg-firewall -o 2049,udp,in,nfs
22) nano /etc/sysconfig/nfs and add:
MOUNTD_PORT=808
This forces the mountd daemon to listen on port 808 otherwise it chooses one at random and won't allow inbound connections through the firewall.
Restart the server and you will now have a working TCP NFS daemon on the ESX 3 COS. From there, you can export your folder and mount it using the VI Client.
If on restart the NFSd services fail to load, you may need to copy the System.map (export list) created in the kernel build process into the /boot folder. This does not change the actual kernel but because the nfsd.o module needs some exports that weren't previously used, the dependency maker added them to the system map.
cp /usr/src/linux-2.4/System.map /boot/System.map-2.4.21-37.0.2ELvmnix
To confirm everything is funtioning, run rpcinfo -p to get the port and transport list of RPC services. The line to look for has "2049 tcp nfs" in it.
** Edited with fixes from posts ** 8/29/06
No promises though as I haven't played w/ iSCSI at all yet.
