It appears that only with Firmware Version V10L47-0000, a Fujitsu
Eternus DX90 S2 will fully utilize VAAI (Details available in Fujitsu
Support document SB-STO-13023).
After upgrading to that firmware version we are observing enjoyable
high throughput with VAAI operations (up to 900 MB/s).
We are only somewhat bothered that vmkernel.log on the ESXi 5.1 server
reports about 2500 lines of Warnings, some even Errors, e.g.
...NMP: nmp_ThrottleLogForDevice:2319: Cmd 0x83 (0x4124801cbe80, 17670) to dev "naa.6000000d10e100000112105c00000000" on path "vmhba4:C0:T0:L1" Failed: H:0x7 D:0x0 P:0x0 Possible sense data: 0x0 0x0 0x0. Act:EVAL
...WARNING: NMP: nmp_DeviceRequestFastDeviceProbe:237:NMP device "naa.6000000d10e100000112105c00000000" state in doubt; requested fast path state update...
...ScsiDeviceIO: 2331: Cmd(0x4124801cbe80) 0x83, CmdSN 0x7bd from world 17670 to dev "naa.6000000d10e100000112105c00000000" failed H:0x7 D:0x0 P:0x0 Possible sense data: 0x0 0x0 0x0.
...<3>lpfc820 0000:0c:00.1: 1:(0):0717 FCP command x83 residual underrun converted to error Data: x6c x6c x6c
Can we savely errors like H:0x7 ()
Now VMWare support says this is a HBA issue:
...
We can see here from the analysis of one of the error codes (this one
came direct from storage, as it was a D:0x2):
H:0x0 D:0x2 P:0x0 Valid sense data: 0xa 0xd 0x1
This means, basically:
Indicates an EXTENDED COPY command was aborted due to an error
condition on the source device. the destination device. or both.
However, there are H:0x7 failures, which usually definitely indicate a
host adapter issue.
...
HP support says they do not check HP adapter / Fujitsu storage
interoperability, and Fujitsu should be asked.
Fujitsu support says it is not an issue with their storage.
betwixed and between ...
Has someone made similar observations?
Regards, Thomas
Here is an abstract of the environment:
ESXi Server
HP DL385 G7
System ROM A18 12/08/2012
FC2242SR HBA
Firmware 2012.02.01a
ESXi Version
VMware ESXi 5.1.0 build-1065491
driver: scsi-lpfc820 8.2.4.151.65-1OEM.500.0.0.472560, Emulex (VMwareCertified)
Storage: Fujitsu Eternus DX90 S2
Firmware Version V10L47-0000
also posted this here
