Hello all, I have a problem that I don't know how to solve it.
I've installed Esx 3.0.1 five months ago. All worked fine.
Then I've installed a network ethernet (412648-B21), it's dual gigabit interface and after starting, in console I had the error in title.
I tried to install the patch of VMWare (ESX-1003505): no install errors.
I was sure that this would have solved my trouble, instead it was an illusion :-((.
Here there is a piece of lspci -v command:
06:00.0 Ethernet controller: Intel Corporation 82571EB Gigabit Ethernet Controller (rev 06)
Subsystem: Hewlett-Packard Company: Unknown device 7044
Flags: bus master, fast devsel, latency 0, IRQ 17
Memory at dfc20000 (32-bit, non-prefetchable)
Memory at dfc00000 (32-bit, non-prefetchable)
Capabilities: Power Management version 2
Capabilities: Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
06:00.1 Ethernet controller: Intel Corporation 82571EB Gigabit Ethernet Controller (rev 06)
Subsystem: Hewlett-Packard Company: Unknown device 7044
Flags: bus master, fast devsel, latency 0, IRQ 17
Memory at dfc60000 (32-bit, non-prefetchable)
Memory at dfc40000 (32-bit, non-prefetchable)
Capabilities: Power Management version 2
Capabilities: Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
In VI I see only one interface not two.
Could you help me to understand, please?
Thank you very much.
Denis
Hi all,
please have you got any idea of my problem?
Thanks a lot
Hi,
It seems to be an hardware issue.
Have you checked for hardware errors using HP Insight Management Agents and ILO logs?
Have you tried to check BIOS and firmwares fixed issues on the HP web site?
Have you checked the driver (cat /proc/net/PRO_LAN_Adapters/vmnic2.info | grep Driver_Version)?
Regards,
Hello M.Y.
sorry for late. I solved my problem installing ESX 3.5. Now I'm checking the network, it seems to work fine.
Anyway thanks for support.
Best Regards,