VMware

This Question is Possibly Answered

1 "correct" answer available (10 pts) 2 "helpful" answers available (6 pts)
3 Replies Last post: Jul 3, 2009 5:29 AM by Texiwill  

TCP sequence number too high, a transport-level error has occured when sending the request to the server posted: Jul 1, 2009 11:19 PM

Click to view jrsweden's profile Lurker
jrsweden
2 posts since
Apr 25, 2009

I have a network related problem, communication issue between two VM in a ESX 3.5 environment. My firewall is telling us that "tcp sequence number too high" and drop packets.

Background: One W2003 Standard IIS VM with .Net applikation communicating with one W2003 Enterprise SQLServer 2005. VM sitting on each VLAN. VM communicating through firewall and switches.

Suddenly firewall reports "tcp sequence number too high" and communication is lost. Event viewer in W2003 IIS reports "A transport-level error has occured when sending the request to the server".

Is there any known issues about tcp handling in virtual switches, nic's or other network related environment? Is there any white-papers regarding configuration scenarios?

Thanks
Jörgen Rönning, Gotit Sweden
jorgen.ronning@gotit.se

Tags: 3.5, nic, vswitch, tcp, tcp, ip, firewall, network, sequence

Re: TCP sequence number too high, a transport-level error has occured when sending the request to the server

1. Jul 2, 2009 9:08 AM in response to: jrsweden
Click to view Texiwill's profile Guru
Texiwill
10,213 posts since
Jan 13, 2004
Hello,

Moved to the Virtual Machine and Guest OS forum.

There was a similar issue when using vmxnet with multiple vCPUs on RHEL. Are you using multiple vCPUs and the vmxnet driver? If so then try using the e1000 or pcnet32 network drivers.


Best regards,
Edward L. Haletky VMware Communities User Moderator, VMware vExpert 2009, Virtualization Practice Analyst
Now Available: 'VMware vSphere(TM) and Virtual Infrastructure Security: Securing the Virtual Environment'
Also available 'VMWare ESX Server in the Enterprise'
SearchVMware Pro|Blue Gears|Top Virtualization Security Links|Virtualization Security Round Table Podcast

Re: TCP sequence number too high, a transport-level error has occured when sending the request to the server

2. Jul 3, 2009 1:18 AM in response to: Texiwill
Click to view jrsweden's profile Lurker
jrsweden
2 posts since
Apr 25, 2009

Thankyou for your reply.

VM IIS W2003 are using 2 vCPU and a Flexible NIC. VMware TOOLS is running. In control panel/add remove hardware we can read VMware Accelerated AMD PCNet Adapter.
VM SQL 2005 are using 4 vCPU and a Enhanced vmxnet NIC. VMware TOOLS is running. In control panel/add remove hardware we can read VMware PCI Ethernet Adapter #3.
ESX 3.5 patch 4 installation uses the "console".

The flexible driver can work as a vmxnet NIC (http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1001805). With VMware TOOLS it should be a vmxnet NIC driver.

Are we using multiple vCPUs? YES.
Are we using RHEL? YES.
Are we using vmxnet driver? YES.

How can we change the behavior of the flexible driver to use any other network driver than vmxnet?
If this is right - then we have several VM using wrong network driver.

Thanks
Jörgen Rönning, Gotit Sweden
jorgen.ronning@gotit.se

Re: TCP sequence number too high, a transport-level error has occured when sending the request to the server

3. Jul 3, 2009 5:29 AM in response to: jrsweden
Click to view Texiwill's profile Guru
Texiwill
10,213 posts since
Jan 13, 2004
Hello,

VM IIS W2003 are using 2 vCPU and a Flexible NIC. VMware TOOLS is running. In control panel/add remove hardware we can read VMware Accelerated AMD PCNet Adapter.
VM SQL 2005 are using 4 vCPU and a Enhanced vmxnet NIC. VMware TOOLS is running. In control panel/add remove hardware we can read VMware PCI Ethernet Adapter #3.
ESX 3.5 patch 4 installation uses the "console".

The flexible driver can work as a vmxnet NIC (http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1001805). With VMware TOOLS it should be a vmxnet NIC driver.

This is the driver provided by VMware, it is the vmxnet driver. Just remove it and go back to the default pcnet32 driver. Flexible implies that you can either use the vmxnet or pcnet32. Until you install VMware Tools, pcnet32 is in use. Just change the driver for the vNIC.

Are we using multiple vCPUs? YES.
Are we using RHEL? YES
Where? BOTH VMs are Windows.... This is not an ESX Management Appliance issue.
.
Are we using vmxnet driver? YES.

Another option is to go to one vCPU and see if that corrects the problem.

In either case I would open a case with VMware Support to get better assistance, they will ask you to go back to pcnet32 or use the e1000 driver as well. e1000 takes more to change out on VI 3.x than it does in vSphere but it is one solution as well. e1000 like pcnet32 is a native windows driver.


Best regards,
Edward L. Haletky VMware Communities User Moderator, VMware vExpert 2009, Virtualization Practice Analyst
Now Available: 'VMware vSphere(TM) and Virtual Infrastructure Security: Securing the Virtual Environment'
Also available 'VMWare ESX Server in the Enterprise'
SearchVMware Pro|Blue Gears|Top Virtualization Security Links|Virtualization Security Round Table Podcast

Actions

VMware Developer

SDKs, APIs, Videos, Learn and much more in the Developer community.

Learn More

Developer Sample Code

Increase your developer productivity with VMware API sample code.

Learn More

VMworld Sessions & Labs

Online access to the latest VMworld Sessions & Labs and online services.

Learn more

Purchase PSO Credits Online

Purchase credits to redeem training and consulting services online.

Buy Now

Community Hardware Software

View reported configurations or report your own.

Learn More

VMware vSphere

Come witness the next giant leap in virtualization.

Register Today

Communities