Re: Requested file "[VMFS] LabMan/504/000504-Windows2008STDFull.vmdk" not found

efulton — Fri, 15 May 2009 19:08:34 GMT

That looks like a vm that is already in lab manager. Or at least was once in this or another lab manager installation, and LM really isn't equipped to expect a VC VM to even have a linked-clone chain, so I suspect it's failing to find the next vmdk in the chain.

What kind of history has this VM had?

Does that UUID on the sched.swap.device 48eda33e-b4edc3d0-db1f-001a64d47f64 match the uuid of your filesystem?

Requested file "[VMFS] LabMan/504/000504-Windows2008STDFull.vmdk" not found

vincensh — Thu, 14 May 2009 04:23:01 GMT

Hi all,

newbie to the community.....have been battling an issue over the past 3 days. I have a VM in VC, which I am trying to pull into Lab Manager as a template - Import Template.

However I receive the following error - Requested file "VMFS_INFRA LabMan/504/000504-Windows2008STDFull.vmdk" not found

When I check the datastore that the VM resides I can see the VMDK file there, so am unsure on why it says it cannot be found...

The vmx file for the VM has the following entries;

#!/usr/bin/vmware
floppy0.startconnected = "FALSE"
tools.upgrade.policy = "useGlobal"
uuid.action = "keep"
ide0:0.clientdevice = "false"
usercpuid.80000001 = "00000000000000000000000120000000"
ide0:0.startconnected = "false"
sched.mem.max = "4096"
ethernet0.wakeonpcktrcv = "false"
scsi0.sharedbus = "none"
extendedconfigfile = "000504-WNZAKLDS1.vmxf"
scsi0.present = "true"
deploymentplatform = "windows"
guestcpuid.1 = "0001067800010800000822010febfbff"
numvcpus = "2"
guestos = "winvista"
powertype.reset = "default"
memsize = "2048"
sched.mem.shares = "normal"
virtualhw.productcompatibility = "hosted"
guestcpuid.80000001 = "00000000000000000000000120000000"
ethernet0.addresstype = "static"
serial0.present = "false"
displayname = "000504-wnzaklds1"
mks.thumb.targetwidth = "64"
scsi0:1.filename = "000504-WNZAKLDS1-0-1.vmdk"
ide0:0.filename = "/dev/cdrom"
tools.synctime = "false"
evccompatibilitymode = "FALSE"
uuid.location = ""
mks.thumb.filename = "current.png"
serial0.yieldonmsrread = "true"
virtualhw.version = "4"
scsi0:0.devicetype = "scsi-hardDisk"
ethernet0.present = "true"
powertype.suspend = "default"
tools.deploypkg.filename = ""
ethernet0.virtualdev = "e1000"
usercpuid.1 = "0001067600040800000822010febfbff"
floppy0.connected = "FALSE"
uuid.bios = "50 0a 39 63 20 63 bf 9d-bc 12 4f 48 6d 7b 08 48"
ide0:0.connected = "FALSE"
sched.scsi0:0.shares = "normal"
log.filename = "vmware.log"
ide0:0.present = "true"
hostcpuid.80000001 = "00000000000000000000000120000000"
usercpuid.0 = "0000000a756e65476c65746e49656e69"
sched.cpu.min = "0"
sched.mem.minsize = "0"
scsi0:0.present = "true"
ide0:0.devicetype = "atapi-cdrom"
scsi0:1.present = "true"
vmware.tools.requiredversion = "7202"
mks.thumb.targetheight = "48"
scsi0.virtualdev = "lsilogic"
ethernet0.address = "00:50:56:3d:01:e6"
ethernet0.networkname = "LabMan Default-2LM61"
floppy0.present = "false"
powertype.poweroff = "default"
guestcpuid.0 = "0000000a756e65476c65746e49656e69"
scsi0:0.redo = ""
serial0.filename = "/dev/ttyS0"
usb.present = "false"
hostcpuid.1 = "0001067600040800000ce3bdbfebfbff"
config.version = "8"
powertype.poweron = "default"
sched.cpu.units = "mhz"
mks.thumb.updateperiodsecs = "5"
machine.id = "numnics=1&macaddr_0=00:50:56:3d:01:e6&bootproto_0=static&ip_0=10.204.34.190&netmask_0=255.255.254.0&gateway_0=10.204.34.5&dns1_0=10.204.34.115&dns2_0=10.204.32.115&suffix_0=nzakl.danet&primaryNic=0&computerName=WNZAKLDS1&UseSysPrep=Yes&bitMask=1&markerid=234404041&reconfigToken=887047522"
nvram = "000353-Windows2008STDFull.nvram"
sched.swap.derivedname = "/vmfs/volumes/48eda33e-b4edc3d0-db1f-001a64d47f64/LabMan/504/000504-WNZAKLDS1-52a21be4.vswp"
hostcpuid.0 = "0000000a756e65476c65746e49656e69"
sched.cpu.shares = "normal"
scsi0:0.filename = "000504-Windows2008STDFull.vmdk"
scsi0:1.deviceType = "scsi-hardDisk"
scsi0:1.redo = ""
guestOSAltName = "Microsoft Windows Vista (32-bit)"
sched.cpu.affinity = "all"
migrate.hostlog = "./000504-WNZAKLDS1-52a21be4.hlog"

Is there a procedure I should undertake to ensure that
a) it's looking for the correct VMDK file
b) any manual way to resolve this

Thanks

VMware Communities: Message List - Requested file "[VMFS] LabMan/504/000504-Windows2008STDFull.vmdk" not found

Re: Requested file "[VMFS] LabMan/504/000504-Windows2008STDFull.vmdk" not found

Requested file "[VMFS] LabMan/504/000504-Windows2008STDFull.vmdk" not found