VMware Communities: Message List - VM up but no conectivity 1.0.8 -> Jan 9 15:59:38 MACHINE kernel: [4440]: /dev/rtc enable interrupt failed: -1

Re: VM up but no conectivity 1.0.8 -> Jan 9 15:59:38 MACHINE kernel: [4440]: /dev/rtc enable interrupt failed: -1

nunog — Mon, 12 Jan 2009 10:47:36 GMT

Any ideias ? about the error /dev/rtc enable interrupt failed: -1 ?

Re: VM up but no conectivity 1.0.8 -> Jan 9 15:59:38 MACHINE kernel: [4440]: /dev/rtc enable interrupt failed: -1

nunog — Fri, 09 Jan 2009 18:25:23 GMT

Well, both machines are up and running
imported the VMs again and they started to respond with connectivity. Although on the machine were wmware server 1.0.8 runs on the /var/log/messages the message continues to appear:

kernel: 4440: /dev/rtc enable interrupt failed: -1

All services on the VMs ar ok and running.
Don't know if I have to worrie about this or not

Any advices are really appreciated.
Once again thanks for your time and patience

Nuno

Re: VM up but no conectivity 1.0.8 -> Jan 9 15:59:38 MACHINE kernel: [4440]: /dev/rtc enable interrupt failed: -1

nunog — Fri, 09 Jan 2009 16:21:16 GMT

Have installed VMware-tools but no success

Re: VM up but no conectivity 1.0.8 -> Jan 9 15:59:38 MACHINE kernel: [4440]: /dev/rtc enable interrupt failed: -1

nunog — Fri, 09 Jan 2009 16:19:54 GMT

Just to add that the message :
kernel: 4440: /dev/rtc enable interrupt failed: -1

appear on the var/log/messages of the phisical machine not from the Virtual one.

Read something about the real time clock and compile the kernel but in CENTOS.
Anyway one machine is running ok on another VLAN that is bridged with vmware /dev/vmnet

thanks again

VM up but no conectivity 1.0.8 -> Jan 9 15:59:38 MACHINE kernel: [4440]: /dev/rtc enable interrupt failed: -1

nunog — Fri, 09 Jan 2009 16:16:54 GMT

Hi All,
Just installed VMware 1.0.8 on a Fedora Core 10 64 bits.
All is running smothly.

Restored a VM from a vmware server 1.0.6 and all ok -> machine up and with conectivity ! Yessss
Then decided to restore the other VM and it booted ok ! Still with no connectivity.

The network interface is bridged with the fisical network and the only thin strange that I get is, when I boot this second machine the /var/log/messages shows up with this message:

an 9 15:59:38 MACHINE kernel: 4440: /dev/rtc enable interrupt failed: -1

several times and with no regular time interval
and no conectivity

Do you guys have any hint what might it be ?

thanks for reading this and best regards
Nuno