VMware Communities: Message List - ESXi installed to USB only works when drive is presented as "fixed"?

Re: ESXi installed to USB only works when drive is presented as "fixed"?

litkaj — Mon, 18 Aug 2008 22:27:20 GMT

10 points for you! That worked perfectly, thanks.

In case anyone is wondering what I'm using now, the link is below. These, combined with the bit switcher linked to above, boot without any BIOS changes on my PE2900 servers and my Optiplex 755 test system. In fact, not counting the time spent POSTing, these boot ESXi twice as fast (seriously, twice as fast) as the Lexar JumpDrive I was using in testing.

http://www.newegg.com/Product/Product.aspx?Item=N82E16820609294

Jason Litka
http://www.jasonlitka.com

Re: ESXi installed to USB only works when drive is presented as "fixed"?

matthewk — Mon, 18 Aug 2008 21:00:54 GMT

I ran across the following utility that may be able to "flip" the removable bit on a USB flash drive. Whether this will make a difference in ESXi booting, I am not certain.

http://www.pendriveapps.com/2008/05/01/bootit-lexar-usb-flip-the-removable-media-bit-tool/

Re: ESXi installed to USB only works when drive is presented as "fixed"?

leofonic — Sun, 17 Aug 2008 17:35:14 GMT

I have ESXi installed on 2 Sticks, one is a PNY Mini Attaché, one is a CNMemory, both show up in Windows as "removable". The only thing i changed in BIOS is the boot order.

Re: ESXi installed to USB only works when drive is presented as "fixed"?

litkaj — Sun, 17 Aug 2008 16:53:33 GMT

This really hasn't been "answered", but I don't think I'm going to get anything more than I've already posted in my original question.

It looks like in order to boot ESXi from a USB drive it either has to present itself as a fixed drive on its own (which seems rare on newer drives) or you need to select "Fixed" as the USB device mode in your BIOS. If you don't have the BIOS option then you're pretty much out of luck.

Re: ESXi installed to USB only works when drive is presented as "fixed"?

litkaj — Tue, 12 Aug 2008 20:07:35 GMT

Yeah, but my systems don't have that option. What I was saying is that the original USB drives I was testing with showed up as fixed drives under Windows without my doing anything. Unfortunately, they're a few years old and I don't even think they're made any more.

Jason Litka
http://www.jasonlitka.com

Re: ESXi installed to USB only works when drive is presented as "fixed"?

matthewk — Tue, 12 Aug 2008 20:01:30 GMT

I had to set my USB thumbdrive to "Fixed" in the BIOS. I'm using a Kingston DataTraveler.

ESXi installed to USB only works when drive is presented as "fixed"?

litkaj — Tue, 12 Aug 2008 17:41:13 GMT

So, I think I may have jumped the gun on rolling out ESXi to some servers here in the office. I was planning on using USB thumb drives to boot ESXi (using the method described, extracting the dd image, using WinImage to write it to a thumb drive, etc.) and then just replacing them every 6 months or so during a regular hardware maintenance cycle. The power savings from not having SAS drives in the system will more than cover the cost of the thumb drives and if the power goes out it should buy me a few extra minutes of run time.

It seems to me though that ESXi won't boot correctly from any thumb drive or memory card that is detected by Windows as "Removable". The boot process starts OK but then hangs with a few "Waiting for USB Boot Partition to show up" messages, followed by a final "PANIC: Failed to find USB Boot Partition". The original thumb drives I was testing with showed up in Windows as a "fixed" disk, not "removable" as every other drive I've tested since.

Does anyone have ESXi working on a USB drive that is presented to Windows as "Removable"? If not, does anyone know of any small thumb drives that work?

Jason Litka
http://www.jasonlitka.com