Blog Posts

Back in the ESX 2.5 days it was a common recommendation to have at least 3 NICs for ESX. One NIC each for the service console, VMotion, and VMs. It was really a waste for many to have to dedicate an entire NIC for the low network traffic to the service console. Then with ESX 3 the networking features became more flexible, and you could easily setup the service console to share a NIC with VMotion or the VMs.

The M600 and M605 blades for the Dell M1000e blades chassis now have two on-board NICs and the option to add two more I/O cards, each with two ports of either Ethernet or fibre channel. This means that you can have four NICs and two fibre channel ports for storage OR six NICs with 2 dedicated to iSCSI for storage. The four available NICs for VM data traffic is usually enough, although I admit there are always exceptions.

So if the I/O options on the blades are not enough there are options with the R805 and R900 and R905 that offer oodles of NICs. Specifically the R805 has four on-board NICs and four PCI slots. Filling these slots with your required mix of quad-port NICs and dual-port fibre channel HBAs would be a great solution for environments that have high requirements of physical NICs to support their VMware environment.

Todd

For the past three weeks, we at the Dell TechCenter have been focused on the decoder ring for systems management. Starting today we are going to tell you what the best server is for virtualization. The reason it is going to take three weeks is that the answer for everybody is different. So we are going to talk about key factors, advantages of one type of server over another, and learn from the decisions and thought processes of each other. We are simply hosting the conversation and I do not have a "favorite server" -- although I must admit that I used to lean heavily towards 2-socket servers.

The decision for most seems to come down to 2-socket, 4-socket, or blades servers. I hope that we end up expanding the conversation and talk about lots of other possibilities including storage options, hypervisor options, and who knows what else.

In order to get things going are going to have some chat sessions, there is a topic home page, and a server selection matrix page to specifically lay out the facts about each type of server. I've started the page off with 2-socket, 4-socket, and blades as server categories with some basic tech specs and advantages for each type. This page will grow as additional pros, cons, and others ideas come up.

Todd