VMware Communities > Blogs > Virtualization Frontier > Tags

Blog Posts

Virtualization Frontier

2 Posts tagged with the fiber tag
0

I've been a user of Fibre Channel SANs for about eight years. I have used the Dell | EMC-based arrays throughout and have gone through a few product transitions from the FC4700 to the CX-600 to most recently a CX3-80. I always liked the Navisphere management tool and was able to great performance across the range of applications that I set up to use the Fibre Channel storage.

About eight months ago I was finally convinced to try out some iSCSI arrays. First, I worked with the Dell | EMC CX3-40c, which has both iSCSI and Fibre Channel ports. This configuration didn't really seem all that different from what I was used to with Fibre Channel, mostly because I was still using Navisphere. Next, I set up and used a PowerVault MD3000i and found this array to be really easier in some ways, although it didn't have the same features in lots of respects. Finally, about four months ago I started using some Dell EqualLogic PS5000 Series iSCSI storage arrays. And I did some performance testing with them in a whitepaper that was released about a month ago. The net was that this setup is really much easier, and I was able to get great performance.

We are having a chat here on delltechcenter to discuss when to use what type of storage for virtualization, and we expect a lot of the discussion to be about iSCSI versus Fibre Channel. Feel free to join the chat or check out the transcript, depending on when you are reading this.

I haven't done a head-to-head performance comparison of Fibre Channel versus iSCSI, and I don't plan to either. I've been able to get great performance with both in the tests that I have run. It's more the ease of setup and use that makes iSCSI so compelling for me. I had resisted iSCSI for a while because I just knew that it wouldn't be good enough, but now that I have started using it I find that it works fine. I think that Fibre Channel still has places where it fits best, but I would highly recommend that iSCSI be considered for all new projects. I'm still using both in my lab. You just might find that you will like iSCSI-if you try it.

Todd

0 Comments Permalink Tags: delltechcenter, equallogic, md3000i, powervault, clariion, emc, fiber, fibre, fibrechannel
1

After spending the last few weeks looking into which server to choose for virtualization, a natural next question is - What should I use for storage? I think that the answer here may be easier in some ways, but more complicated in other ways.

Mark Farley, on the InsideIT blog, highlighted a recent video by Darren Thomas, General Manager of Storage - aka Chief Storage Guy - here at Dell, that focuses on how storage virtualization works well with server virtualization. Just as VMs are able to use live migration to move from one physical server to another, virtualized storage can move those same VMs from one storage array to another. The result is that you have a tremendous amount of flexibility and availability.

There are three major categories for storage: local, iSCSI, and Fibre Channel. There are lots of choices within these, but I think that when deciding what to use to support your virtualization servers this is the best starting organization. If you are going to only have one virtualization server (or one per location) then local storage will work just great. If you already have an existing fibre channel SAN and existing expertise to manage it, then fibre may be the best solution for your virtualization server farm. Everybody else should probably take a really hard look at iSCSI.

Within the iSCSI category at Dell we have three areas to pick from: PowerVault MD3000i, Dell EqualLogic PS Series, and Dell | EMC AX and CX iSCSI arrays. I think that the decision here also breaks down very similar to how we arrived at the type of storage. For smaller deployments or those that do not need array level features like replication the PowerVault MD3000i (with an attractive entry-level price) is a good choice. For customers that already have some Dell|EMC fibre channel or iSCSI it might be a good idea to extend this environment with additional iSCSI for your virtualization needs. I think that the Dell|EqualLogic PS series is a strong contender for all other solutions.

Of course it's really a bit more complicated than this, but this is the way that I frame up a conversation around storage for virtualization solutions.

Todd

1 Comments Permalink Tags: recommendation, storage, iscsi, fiber, md3000i, equallogic, delltechcenter

ToddMuirhead

 Member since: Feb 13, 2006

Some Stuff on Enterprise Virtualization from DellTechCenter

View ToddMuirhead's profile